How to plug in your Strong SRT 53 Series Set Top Box using S-VHS leads

Click on the image above to see a larger picture with more detail.

First of all, you need to plug in your antenna. The Top right socket is the one to use - it is labeled ANT IN on the box.

You will also need to plug in the antenna loop cable, it is a 2 inch antenna lead that goes from RF Loop OUT to RF Loop IN (bottom right to top left in the illustration)

You can then plug your VCR/TV in to the ANT OUT socket on the bottom left.

This will ensure an interference free picture goes to your analogue tuners in your VCR/TV.

Next, plug in the 2 red/white leads to the set top box, and the corresponding sockets on your television or amplifier. The red/white leads will deliver the left and right audio.

Now, plug in the S-VHS lead into the S-VHS socket on the right hand side of the set top box. The other end goes into your TV, making sure to pair it up with the red/white leads that are delivering your audio.

Once you change to the AV (S-VHS) channel on your television, you will see the installation menu like this one.

It is important to change the SCART output setting in the menu to S-VHS - otherwise you will get a black and white picture.

For more information about this set top box, please click on the links to the right to see how to set up your set top box.

For More Information Please Email Us